EN 10028 – P275NH/NL1/NL2

P275NH is a weldable fine-grain steel suitable for the fabrication of pressure vessels for pressurised gases and chemicals, industrial boilers, compressors and heat exchangers. The grade is intended for use in moderate to high temperature service.
Other grade types include…

  • NL1 – is ideal for use in low temperatures
  • NL2 – is ideal for use in especially low temperatures

Masteel offers P275NH from stock and deliver worldwide. Our carbon plates are also tested to the most stringent standards which makes the suitability of our stock even greater and ensures you get a quicker delivery.

Table 2: Mechanical Properties of EN 10028 – P275NH/NL1/NL2

GradeTypeThickness (mm)Yield Strength
MPa (min)
Tensile Strength
MPa
Elongation
% (min)
P275 NHNormalized≤ 16275390 - 51024
P275 NL116> to ≤40265390 - 51024
P275 NL240> to ≤60255390 - 51024
60> to ≤100235370 - 49023
100> to ≤150225360 - 48023
150> to ≤250215350 - 47023

(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)

Table 1: Chemical Composition of EN 10028 – P275NH/NL1/NL2

P275 NHP275 NL1P275 NL2
C0.160.160.16
Si0.400.400.40
Mn0.80 to 1.500.80 to 1.500.80 to 1.50
P0.0250.0250.020
S0.0150.0150.010
Al0.0200.0200.020
N0.0120.0120.012
Cr0.300.300.30
Cu0.300.300.30
Mo0.080.080.08
Nb0.050.050.05
Ni0.500.500.50
Ti0.030.030.03
V0.050.050.05

(The combined quantities of Niobium, Titanium and Vanadium should be 0.05% max.)